BRAND NEW

 2 PAIRS

HUBCENTRIC WHEEL SPACERS

Made in the UK from UK sourced aluminium plate

Designed to fit the following vehicles / specification

PCD - 5x120 BMW fitment

Centre bore - 72.6

Wheel bolt size - Will accept either M12x1.5 / M14x1.25 / M14x1.5 bolts

Diameter of spacer - 150mm (15cm)

Ideal for spacing your wheels if you have fitted different wheels / brakes / suspension where you just need that little bit of extra clearance and don't want to run a larger spacer

A lot of the time you may not need longer bolts ....

HOWEVER you need to ensure that on your vehicle when fitting the spacer you can still get AT LEAST 7 full turns of thread

If you cannot get a minimum of 7 turns then you WILL need to buy longer bolts

Please note - due to the nature of these spacers being made from aluminium plate rather than billet aluminium there maybe surface marks / light scratches where the spacers have been made / pressed on the machines