ABB Soft Starter Softstart PSE142-600-70 Motor Drive 208-600VAC 142A Modbus RTUABB Soft Starter Softstart PSE142 600 70 Motor Drive 208 600VAC 142A Modbus RTU Info from ABB: Dimensions Product Net Width: 130 mm Product Net Height: 295 mm Product Net Depth Length: 220 mm Product Net Weight: 4. 4 kg Technical Rated Operational Voltage: 208 600 V AC Rated Control Supply Voltage (Us): 100 250 V AC Rated Control Circuit Voltage (Uc): 24 V DC Rated Frequency (f): 50 60 HzMain Circuit 50 60 Hz Rated Operational Power In Line Connection
Shopping security
Each payment you make on thelockerguy is secured with strict SSL encryption and PCI DSS data protection protocols
Rated Operational Power - In-Line Connection (Pe):
(230 V) 40 kW (400 V) 75 kW (500 V) 90 kW
Rated Operational Current - In-Line Connection (Ie):
143 A
Service Factor Percentage:
100 %
Overload Protection:
Build-in electronic overload protection
Integrated Electronic Overload:
Yes
Adjustable Rated Motor Current Ie:
30 ... 100 %
Starting Capacity at Maximum Rated Current Ie:
4xIe for 10s
Ramp Time:
0 ... 30 second [unit of time] 1 ... 30 second [unit of time]
Initial Voltage During Start:
30 ... 70 %
Step Down Voltage Special Ramp:
No %
Current Limit Function:
1.5 ... 7xIe
Switch for Inside Delta Connection:
No
Run Signal Relay:
Yes
By-pass Signal Relay:
Yes
Fault Signal Relay:
Yes
Overload Signal Relay:
Yes
Analog Outputs:
4…20 mA
Signal Indication Completed Start Ramp (LED):
Green
Signal Indication Ready to Start/Standby ON (LED):
Green
Signal Indication Running R (LED):
Green
Signal Indication Ramping Up/Down (LED):
Green
Signal Indication Protection (LED):
Yellow
Signal Indication Fault (LED):
Red
Number of Starts Per Hour at 3.5*Ie for 7 sec. 50% ON Time 50% OFF Time:
10
Communication:
Modbus-RTU
Degree of Protection:
IP00
Terminal Type:
Main Circuit: Bars
Connecting Capacity Main Circuit:
Hole Diameter 8.5 mm Rigid 1/2 x 2.5 ... 70 mm² Width and Thickness 17.5x5 mm
Connecting Capacity Control Circuit:
Rigid 1 x 2.5 mm² Rigid 2 x 1.5 mm²
Connecting Capacity Supply Circuit:
Rigid 1 x 2.5 mm²
Tightening Torque:
Control Circuit 0.5 N·m Main Circuit 18 N·m Supply Circuit 0.5 N·m
Product Main Type:
PSE142
Function:
Soft start with torque control Soft start with voltage ramp Soft stop with torque control Soft stop with voltage ramp Kick start Sequence start Current limit Start reverse (external contactors) Automatic restart Event log
Protection Function:
Electronic overload protection, EOL; Locked rotor protection; Current underload protection
Technical UL/CSA
Maximum Operating Voltage UL/CSA:
Main Circuit 600 V
Tightening Torque UL/CSA:
Control Circuit 4.4 in·lb Main Circuit 159.3 Supply Circuit 4.4 in·lb
Environmental
Ambient Air Temperature:
Operation -25 ... +60 °C Storage -40 ... +70 °C
Degree of Protection:
IP00
RoHS Status:
Following EU Directive 2002/95/EC August 18, 2005 and amendment
Unit is in great electrical condition, only in service for about a year before no longer being needed. Has one broken clip on the inside of the front panel right below the ethernet port (pictured) Guaranteed working.
This item is free shipping to the lower 48 States, contact us for a quote elsewhere.
Feel free to contact us with any questions
Thank you for your interest and have a great day!
International buyers - please note: Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be, prior to bidding or buying.
If you are using an International freight-forwarding or mail redirection- You are not covered through the eBay money-back guarantee if your item was sent to another address after original delivery, unless you request to use the eBay Global Shipping Program or eBay International Standard Delivery. We are not responsible for any items after they have arrived at a third-party freight-forwarder or mail redirection service.