Non slip floor coating to provide your flooring with a safe, clear surface finish.

This quick drying and cost effective anti slip floor solution complies with HSE slip requirements to quickly reduce the chance of slip injury. A strong PTV of 36+ for wet and dry floors according to BS 7976.

Suitable for all interior hard floors, including Vinyl, Wood, Laminate, Karndean, Amtico, Lino, Resin and Stone.

•  Easy to apply, water-based lacquer with good adherence and effective results
•  Only one coat necessary for quick fix and anti-slip solution
•  Floor becomes safe to walk on after just 4-6 hours
  

Recommended use

For all interior hard floors including Wood, Laminate, Karndean, Amtico, Vinyl, Lino, Resin and Stone – where a greater slip resistance is required.

Initial cleaning after installation

1. Simply clean the floor of all grease and contamination using Clean and Strip.
   Shake up well and apply one coat with a roller.
   The floor can be carefully walked on after just two hours!

 Coverage: 20m2 per L

 Conforms to HSE Pendulum BS7976-2

Recoating

To be certain that your floor remains safe and to continue to prevent floor slips, slip injuries and fall accidents, it is recommended to reapply approximately every 6 months for domestic use (low traffic areas), every 3 months for moderate commercial use (medium traffic areas) and every month for busy commercial use (high traffic areas).

1. Simply clean the floor using PU Cleaner.
2. Shake up well and apply one coat with a roller.

The floor can be carefully walked on after just two hours!

People and customers remain safe AT ALL TIMES

Businesses show due diligence AT ALL TIMES