Leather Adhesive Crack Repair Set Colourlock, 20g is a kit for repairing tears. Ideal for repairing tears, holes and for gluing edges from pinches or leather fibers. The amount of 20 ml of Leather Glue is enough to repair several centimeters of the tear or several tears.

How to use: Apply the adhesive sparingly, in a thin layer and remove it on the narrow edges or inaccessible places using the brush from the set (mini brush). Let the adhesive dry, and if the area has been stabilized with the textile material from the set, press a little until it dries.

Cracks and tears that are large, but repairable, must be stabilized by lining with textile material. Cut the material slightly larger than the size of the defect and mark its center with a marker or a piece of sticker. The marking will show you exactly where the center is so that the material covers the entire surface of the defect, as well as a portion around it. Push a needle into the center of the marking and defect and then position the material under the leather with the Flat Head Spatula Long. Then glue the leather to the material.

In the case of cracks, superficial cuts and worn areas, Leather Glue should be applied sparingly. For an easier application, use the brush (mini brush) from the set.

Clothing leather is generally very thin. In the case of thin leather, apply the adhesive sparingly to avoid "gluing the structure" of the leather. When the adhesive enters the leather, it will be visible on the outside in the form of a stain.

Content:

1 x Leather Glue 20 ml
1 x Textile for glue repair (approx. 15 x 25 cm)
3 x Mini Brush