Barix Exstreamer M400 IP Audio Decoder

The Barix Exstreamer M400 feeds your PA and turns it into an extensive Audio over IP system. A wide variety of audio environments, such as SIP, InformaCast and Syn-Apps are supported. Codecs include PCM, AACplus, MP3, OPUS, G.711, G.722 that can be streamed using HTTP and RTP. Audio files can be stored on the internal memory and their playback can be trigger ed via a simple UDP command. Thanks to the priority handler, the Exstreamer M400 can be configured to switch between sources according to one of the five priority settings eliminating the need for an audio matrix device. The M400 is a solid metal device, compact and easily installed. It is connected to your amplifier, DSP or audio mixer via a stereo output on RCA connectors. The configuration of the device is done via the local web interface.

Key Features

• Stereo Line Level Audio output (cinch/RCA connector)
• Ruggedized aluminum case
• Ultra-reliable with dual boot recovery

Technical Specifications

OPERATION SYSTEM
Embedded Linux based on Yocto
NETWORK INTERFACES
1 x Ethernet (RJ45) Interface
IPv4, IPv6 capable
10/100 fdx/hdx, auto negotiation
PROTOCOLS
TCP/IP, UDP, RTP, SRTP SIP, SIPS, HTTP, HTTPS, DHCP, mDNS/DNS-SD (Avahi), NTP
Singlewire InformaCast compatibility - requires extra license
Syn-Apps Revolution compatibility
CPU / MEMORY
Barix IPAM400 Processor Module
Quad-Core ARM Cortex -A7
256MB DDR3 SDRAM
16MB SPI Flash
8GB SD-Card Flash
AUDIO FORMATS
MP3 CBR/VBR, up to 320 kbps, 8..48 kHz sample freq.
AAC-HE (AAC, AAC plus, AAC plus V2)
PCM linear 16bit @44.1 kHz
G.711
Opus, WAV, OGG Vorbis
RS-232 INTERFACE
Serial Port
AUDIO INTERFACE
unbalanced L-R Line level output on RCA connectors
Headphone connector on the front panel
USER INTERFACE
Web interface for configuration
2 x Multicolor LED Status indicators
Reset & Factory Defaults Button
POWER REQUIREMENTS
5VDC, 10W maximum on 5.5x2.1mm barrel connector (inner positive)
MTBF
> 200'000h
Item Includes
Barix Exstreamer M400
Warranty
Two years